Auburn Brass and Bronze Specialists

Brass Railings
in Auburn, WA

Solid brass and bronze railings for Auburn homes and businesses, built and finished by hand a few minutes up the valley in Kent.

5.0

Google Rating

1500+

Railings Installed

100%

Licensed & Bonded

Brass-finish stair handrail with gold and white vertical balusters and a matching upper landing guardrail.
Close-up of a reflective polished brass stair handrail with a rectangular corner post and clean angled joint.

Why Auburn Picks Us

Custom Brass and Bronze Railings in Auburn

Our shop is in Kent, a short run up the valley, which makes Auburn about as local as our work gets. With brass that counts for more than it sounds. The metal gets finished by hand, and when the color needs tweaking against something in your house, being close enough to bring another sample back the same week changes what is possible.

Auburn has a wider mix of houses than people give it credit for. There is genuinely old stock around downtown and Terminal Park, mid century through the valley, and a lot of newer building up on Lea Hill and Lakeland Hills. Brass earns its keep in all three, for different reasons.

What does not change is the metal. We only use solid brass and bronze, never coated stuff, because coated railings wear through where hands go and cannot be fixed. Solid metal can always be brought back, however long it has been in the house.

What We Build

Where Brass and Bronze Railings Go in Auburn Homes

Three settings cover most of our Auburn work, split between the valley floor and the hills either side.

Wide view of a wood staircase with brass-finish handrails, white and gold balusters, and matching landing railings.

Interior and Exterior Brass/Bronze Railings

Indoors, in the older houses it usually means replacing a tired railing, and up on the hills it means adding some warmth to a plain modern room. A clear coat holds the color for years inside. Outside, bronze goes on entries, porches, and decks. The valley holds moisture, with river fog settling in and staying put through the colder months, and bronze answers that by building a protective layer rather than breaking down under it.

Grand gray marble staircase featuring a central brass handrail and curved wood and metal side railings.

Commercial Railings and Architectural Brass

Work for downtown businesses, the commercial strip, and the offices and industrial places through the valley, where brass gives a room some weight. We match what a building already has where there is something to match.

Local Experts

Brass and Bronze Railings Across Every Auburn Neighborhood

Auburn sits on a valley floor with hills on both sides, and the houses up on each are quite different from the ones in between.

Downtown and around Terminal Park and Game Farm the buildings are older, some going back to the railroad days, with details worth working around. Brass there tends to sit alongside rather than replace, and a warmer, darker finish suits the age of the buildings.

Up on Lea Hill, West Hill, and through Lakeland Hills everything is much newer, with bigger houses and open two story entries. Those jobs are about bringing warmth into a modern room, and thin satin brass on the main stairs is the usual answer.

Decorative black steel stair railing with flowing abstract metal patterns on a staircase display.

Auburn Specific

Why Brass Railings in Auburn Are Different

The Green River valley makes its own weather. Cold air settles on the floor overnight and fog sits for days through the winter, so both the damp in your house and the wet outside run higher here than up on the hills either side. Bare brass darkens faster on the valley floor than it does on Lea Hill, which is worth knowing before you pick a finish.

Being five minutes up the road in Kent changes what we can offer on matching. Hand finished brass gets tuned to a particular color, and getting it right against your existing hardware or woodwork sometimes takes a second go. For Auburn customers that is a quick trip rather than another week, so we can afford to get it exactly right.

Curved black wrought iron stair railing with decorative scrollwork and a brass-finish top handrail.

Get a Free Quote

Tell us about your brass or bronze railing project in Auburn, and we will provide a free quote.

Showroom

Visit Our Showroom in Kent

Mon – Fri — 9:00am – 6:00pm
Saturday — By Appointment
Sunday — CLOSED
Mon – Fri — 9:00am – 6:00pm / Saturday — By Appointment / Sunday — CLOSED

Looking for high-quality custom railings, fences, gates, and architectural metalwork? Visit our Custom Railings WA showroom in Kent, WA, where you can explore our wide range of modern, ornamental, glass, cable, commercial railings, fences, gates and other metalwork.

Customer Reviews for Custom Railings WA

See What Our Customers Are Saying

Auburn's Leading Custom Metal & Glass Works Contractor

Make An Appointment Today With Our Online Form

How It Works

From First Call to Finished Project

We keep things simple. Heres what working with us looks like.

1

Request a Quote

Tell us about your project and share photos, dimensions, or inspiration if available.

2

Consultation

We review your goals, style preferences, layout, and material options in detail.

3

Site Measurement

Our team visits the site to take precise measurements.

4

Design

We create custom Brass Railing drawings for your space, style, and requirements.

5

Fabrication

Your Brass Railing is fabricated using high-quality materials with close attention to fit and finish.

6

Installation

We install the Brass Railing carefully on site and make sure every detail is completed properly.

Frequently Asked Questions

Yes, with bronze as the sensible choice. River fog and valley damp mean outdoor metal here spends a lot of the year wet, which bronze turns to its advantage by building a layer that protects the surface. Polished brass goes dark fast out there, so we usually point outdoor jobs toward bronze.

Depends whether you want it to stay as delivered or change. A clear coat locks the color in and drops the upkeep to dusting, which suits a formal room. Leaving it bare lets the brass warm up and darken, and a polish brings it back whenever you want. On the valley floor, where it is damp, bare metal moves noticeably faster than it would up on the hills.

Bronze usually runs a bit higher, because tin costs more than zinc and the outdoor work bronze gets used for tends to need heavier metal. The gap is smaller than most people expect and it rarely decides anything. What normally settles it is where the railing is going, because the indoor metal and the outdoor metal are not interchangeable whatever your budget says.

Our shop and showroom are in Kent, a few minutes up the valley, so Auburn is basically home turf. With brass that is genuinely useful, because hand finished metal sometimes needs the color adjusting against something in your house, and being close means another sample is a quick trip rather than a delay.