Lakewood Brass and Bronze Specialists

Brass Railings
in Lakewood, WA

Brass and bronze railings for Lakewood’s lakeside estates and older homes. Real metal, shaped and finished by hand in our Kent shop.

5.0

Google Rating

1500+

Railings Installed

100%

Licensed & Bonded

Close-up of a satin brass stair handrail with slim white-and-gold vertical balusters in a contemporary interior.
Close-up of a polished brass metal stair handrail connecting to a rectangular post beside a warm-colored wall.

Why Lakewood Picks Us

Custom Brass and Bronze Railings in Lakewood

Lakewood has some of the oldest money in the south Sound, mostly around Gravelly Lake, American Lake, and Interlaaken. Those houses are largely from the 1920s through the 1950s, they sit on big grounds, and a lot of them still have original metalwork worth taking seriously.

That shapes the work. It is rarely about making a statement. Houses of this age were built with a certain restraint and the owners usually feel the same way, so brass goes in to sit correctly with what is already there rather than to draw attention. That is harder than it sounds, and it is why matching takes up so much of the job.

We only use solid brass and bronze and we finish by hand in Kent. In a house with real old metalwork in it, a coated railing is the one thing that would look wrong straight away, and it would only get worse.

What We Build

Where Brass and Bronze Railings Go in Lakewood Homes

Old estates, lakeside damp, and a lot of surviving original detail shape the work here.

Interior wooden staircase with gold-and-white vertical balusters, matching brass-tone handrail, and upper-level guardrail.

Interior and Exterior Brass/Bronze Railings

Indoors, stair railings in the older estates usually need to match or sit beside original hardware and woodwork. Polished brass in a traditional shape suits these houses, and where old metalwork survives we work from it directly. Outside, terraces, entries, and lakeside railings get bronze. The lakes keep the air damp and these places often have a lot of terracing, and bronze handles it by darkening over decades without needing anything.

Grand symmetrical marble staircase with a polished brass center handrail, wooden balustrades, and decorative lamp fixtures.

Commercial Railings and Architectural Brass

Work for the clubs, institutions, and older commercial buildings around the city, plus the service buildings near the base, where brass gives a room a permanence that suits what it is.

Local Experts

Brass and Bronze Railings Across Every Lakewood Neighborhood

Lakewood is a city of lakes, and the houses around each one have their own character, mostly set by when they were built.

Around Gravelly Lake, Interlaaken, and toward Lakewold the estates are the oldest and biggest, with grounds, terracing, and interiors that have been looked after rather than replaced. Brass work there is matching, done alongside whatever is already in the house.

Out through Oakbrook, Springbrook, and Custer the houses are newer and suburban, and brass goes in as an indoor upgrade. Along American Lake and Lake Steilacoom the waterfront brings outdoor work where the damp is a real consideration.

Black metal stair railing panel with flowing leaf-like ornamental lines displayed along a short staircase.

Lakewood Specific

Why Brass Railings in Lakewood Are Different

Matching old metalwork in the estates is the main challenge. These houses often have brass or bronze hardware, light fittings, and sometimes surviving pieces of railing from the 1920s or 1930s, and new work has to sit beside metal that has aged for most of a century. We record what is there, build to those shapes, and work the color toward the original.

The lakes make their own conditions. Places around Gravelly and American Lake stay damp, especially on north facing terraces the sun never reaches, and outdoor metal there is wet for long stretches. Bronze copes well, but the screws need picking for it, because a fixing that traps water will rust and stain long before the railing does.

Curved black wrought-iron staircase railing with decorative scrollwork and a brass handrail beside wooden stair treads.

Get a Free Quote

Tell us about your brass or bronze railing project in Lakewood, and we will provide a free quote.

Showroom

Visit Our Showroom in Kent

Mon – Fri — 9:00am – 6:00pm
Saturday — By Appointment
Sunday — CLOSED
Mon – Fri — 9:00am – 6:00pm / Saturday — By Appointment / Sunday — CLOSED

Looking for high-quality custom railings, fences, gates, and architectural metalwork? Visit our Custom Railings WA showroom in Kent, WA, where you can explore our wide range of modern, ornamental, glass, cable, commercial railings, fences, gates and other metalwork.

Customer Reviews for Custom Railings WA

See What Our Customers Are Saying

Lakewood's Leading Custom Metal & Glass Works Contractor

Make An Appointment Today With Our Online Form

How It Works

From First Call to Finished Project

We keep things simple. Heres what working with us looks like.

1

Request a Quote

Tell us about your project and share photos, dimensions, or inspiration if available.

2

Consultation

We review your goals, style preferences, layout, and material options in detail.

3

Site Measurement

Our team visits the site to take precise measurements.

4

Design

We create custom Brass Railing drawings for your space, style, and requirements.

5

Fabrication

Your Brass Railing is fabricated using high-quality materials with close attention to fit and finish.

6

Installation

We install the Brass Railing carefully on site and make sure every detail is completed properly.

Frequently Asked Questions

Two copper metals with different things added and different habits. Brass takes zinc, comes out golden and bright, and shines up, which is why the old interiors here used it for handrails and hardware. Bronze takes tin, sits browner, and weathers into a protective surface, which is why it turns up on terraces and outdoor work in these estates.

Yes, and in these houses it is common to replace only part of a staircase. That is the harder job, because a new section sitting next to an original one has to match closely enough that your eye does not go straight to it. We record the original in detail before making anything and produce a sample to compare.

Not if we take the color to the right point first. New brass finished bright will stick out badly next to hardware that has aged eighty years, which is why in these houses we darken it in the shop rather than handing it over new and waiting. We make a sample against your existing metal before committing.

We can get close, and in these houses it is usually the whole point. We work from the actual hardware rather than a description, matching the metal first and then the color. What cannot be copied exactly is a century of hands on it, so we show you a sample first and are straight about what is left.